Fence Painting North Shore Auckland

Rough-sawn treated pine paling fences are the most common fence type across the North Shore. These fences absorb moisture and weather quickly if they are left unprotected, which is why staining is usually the most practical long-term choice for this type of timber.

Close-board and lapped timber fences are common in newer North Shore developments and create a cleaner, more solid privacy boundary. The challenge with these fences is that the overlapping joints can trap moisture, which makes thorough coating coverage much more important than it might first appear.

Picket fences need a more detailed approach than standard boundary fencing. They are often tied closely to the style of the house, especially on villas and character homes, so the coating has to look crisp, deliberate, and in keeping with the rest of the property.

In most cases, picket fences suit a painted finish better than a stained one. The shaped tops, visible detailing, and decorative feel all tend to work better with a cleaner solid-colour system that can tie into the trims or main exterior palette of the home.

Post-and-rail fences are more open visually, but they still need good protection because so much of the timber is exposed from all sides. For these fences, stain or oil usually makes more sense than paint. It keeps the timber looking more natural while still giving it the protection it needs against sun, moisture, and weathering.

Cedar is a premium timber and needs to be treated like one. Bare cedar should not be coated with standard acrylic paint systems, because the timber needs to breathe properly and the natural tannins can create issues if the wrong product is used.

For cedar fences, we usually recommend a penetrating oil stain that enhances the timber, slows UV greying, and protects the surface without sealing it up too heavily. This approach tends to keep the cedar looking better and behaving better over time.

Most new timber fences across the North Shore are made from treated pine, and while that treatment protects against rot and insect damage, it does not mean the fence is ready to be coated immediately.

We check whether the timber has had enough time to weather before recommending the system. For most new treated timber fences, that means allowing the timber to settle properly first, then using a product that suits the surface rather than forcing paint on too early.

Concrete block fences and plastered boundary walls need masonry-specific preparation and coatings. These fences often stain, grow algae, and lose visual appeal over time, but they respond well to the right primer and concrete coating system.

For larger areas, spray application can be an efficient way to get even coverage, and textured systems can also be used where you want the fence to feel more finished and less flat.

Metal fencing and gates need a different prep sequence again. Steel needs rust treatment and a rust-inhibiting primer, while aluminium needs the right adhesion-promoting primer before topcoating.

We can coat metal fences and gates to tie in with your timber fence, house trim, or wider exterior palette so the whole boundary feels more deliberate rather than patched together surface by surface.